Cloud Family

Cloud Mini Wireless Bluetooth Setup and Usage Bluetooth Pairing With the headset turned ON, press and hold the Bluetooth multifunction button for 2 seconds. The LED indicator will flash blue. On your Bluetooth-enabled device, search and connect to HyperX Cloud Mini. Once connected, the indicator LED

Cloud Mini Wireless Charging ​ It is recommended to fully charge the Headset before the first use. The headset will take approximately 2.5 hours to fully charge from low battery.

Cloud User Manual

Using with Xbox, PlayStation, or Nintendo Switch ​

Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB THD: < 2% • Power handling capacity: 150mW Sound coupling to the ear: Circumaural Ambient noise attenuation: Approx. 20

​ A. Mic mute button B. Microphone port C. Volume Wheel D. Detachable Microphone E. Microphone Mute LED F. USB Dongle G. USB-C to USB-A Adapter

While the headset is powered off and in adapter mode, hold down the power button until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (e.g. paper clip, SIM tray ejector, etc.) to hold down the bu

In-line audio control operation The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone. To increase the headset volume rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume

A. Gaming headset B. Tuck-away boom microphone C. USB-C Charge port D. Bluetooth multifunction button E. Status LED F. Power button G. 3.5mm headset jack H. USB charge cable

Cloud Core User Manual