Cloud Alpha Family

Slide the wireless mode switch to Dual mode. Press and hold both the power button and the multifunction button for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says "Bluetooth pairing". Go to your device's Bluetooth settings and connect to "HyperX Cloud Alpha 2 Wir

You can connect it to your PS4 via either 3.5mm directly into the controller, or using the included USB sound card. Please note that the Game/Chat balance feature is Windows exclusive and will not work with PlayStation consoles.

Make sure that the HyperX Audio Drivers are installed. Check Windows sound settings and make sure the following devices are assigned correctly: Default playback device: NGENUITY -- 8 Channel Spatial Default playback communications device: NGENUITY -- Chat Default recording device: NGENUITY -- Microp

Usage (PC) To connect the headset to your computer (or another device) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm jacks. The audio plug, which has green stripes, plugs into

Plug in the USB dongle and launch NGENUITY. Click on the Headset tab. Click "Install" on the "Audio Drivers Required" prompt. Wait until the drivers are finished installing. Click "Ok, Will Do" on the "drivers Installed" prompt. Restart your PC.

Headphone Driver: Custom dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 13Hz – 27kHz Impedance: 65 Ω Sound pressure level: 99dBSPL/mW at 1kHz T.H.D.: ≤ 1% Weight: 310g Weight with mic: 321g Cable length: Detachable headset cable (1m) Connection type: Detachab

Go to hyperx.com/ngenuity to download the NGENUITY software. NGENUITY software features include: Audio Tab Basic volume controls Audio equalizer Mic presets Mic effects Spatial Audio Tab Basic spatial audio controls Advanced setting Lights tab Global lights controls Effects library Keys tab *Note: S

Cloud Alpha 2 Wireless - Firmware v121 Changelog Fixed an issue where the headset microphone gain level is set too low when restarting a recording audio stream quickly in adapter mode. Fixed the headset Bluetooth searching LED pattern. Improved the software backend integration. ​Firmware & Updater G

1. Connect the wireless USB adapter to the PlayStation 5 console. 2. Go to the home page and select Settings > Sound 3. Under Microphone set the following: Input Device to USB Headset (HyperX Cloud Alpha Wireless) 4. Under Audio Output set the following: Output Device: USB Headset (HyperX Cloud Alph

Scroll up and down to adjust volume level.