Pulsefire Haste Family

Pulsefire Haste 2 User Manual

Pulsefire Haste 2 Cleaning and Care To clean your mouse, follow the instructions below: Unplug the mouse from your device. Wipe gently with a slightly damp, soft cloth (e.g., microfiber cloth). Avoid using harsh cleaners such as products containing bleach.

The default polling rate is 1k polling rate. Enable 4k Wireless Polling Rate 1. Power off the mouse completely. 2. Press and hold the DPI button. 3. While holding the DPI button, switch the mouse to 2.4G mode. The wheel LED will fast-blink green four times. To revert to the default 1k polling rate,

Connect the mouse to a PC or game console using the included USB cable. USB connectivity will override the selected power mode.

Pulsefire Haste 2 Firmware Update 1106 Description: Fixed the LED powering on, upon system plug in. Fixed white mouse color in NGENUITY. Downgrading to a firmware older than 1106 will cause the mouse color to turn black. Fixed lost DPI button functionality, when modifying DPI button functionality in

Charging It is recommended to fully charge your mouse before first use. The mouse is charged via USB-C, located at the top of the mouse. While plugged in, the mouse will operate in wired mode. 2.4G Wireless Mode 1. Switch the mouse to 2.4G power mode. 2. Connect the USB dongle to the USB adapter. 3.

To place Pulsefire Haste 2 Pro Wireless into Bluetoogh Pairing Mode. Move mouse power switch to bluetooth icon. Hold the left mouse button, right mouse button, and DPI button simutaneously until the mouse flashes blue. The scroll wheel will flash blue, indicating it is in Pairing Mode. ​ Pairing Mod

Pulsefire Haste 2 Wireless Overview A. Left click button B. Right click button C. Mouse wheel D. DPI Button E.Forward button F. Back button G. USB-C port H. HyperX 26K Sensor I. Power mode switch J. USB dongle storage K. Grip tape L. Mouse skates M. USB dongle N. USB adapter O. USB charge/data cable

The HyperX 26K sensor is our custom variant to the PixArt PAW3395.

Mouse Factory Reset If you are experiencing any issue with the mouse you can perform a factory reset. You will lose your custom LED profile and DPI presets by doing this. Press and hold the DPI button and Mouse Scroll Wheel for 10 seconds until the LED flashes. ​