헤드폰

Windows에서 Cloud MIX 2 설정하기 기본 출력 및 입력 장치 설정

The Cloud III S Wireless is **not** compatible with Xbox.

Cloud Core Usage (Xbox One) To use the HyperX Cloud Core headset with Xbox One, you will need the Xbox One adapter (sold separately) that plugs into the Xbox One controller (pictured below). Connect the 3.5mm jack on the headset directly to the Xbox One adapter.

Connecting the CloudX Flight 2 with Xbox console Slide the headset wireless mode switch to adapter mode and slide the dongle mode switch to Xbox mode Connect the USB wireless dongle using the USB-C to USB-A adapter Power ON the headset

클라우드 믹스 사양 헤드폰 드라이버: 커스텀 다이내믹, 네오디뮴 자석이 내장된 40mm 드라이버 유형: 귀 전체를 감싸는 밀폐형 이어팁 주파수 응답: 10Hz~40,000Hz 임피던스: 40Ω 음압 레벨: 1kHz에서 100dBSPL/mW, 총고조파 왜곡(THD): < 2% 무게: 260g 마이크 포함 무게: 275g 케이블 길이: 분리형 헤드셋 케이블: 1.3m PC 연장 케이블: 2m USB 충전 케이블: 0.5m 연결 유형: 분리형 헤드셋 케이블: 3.5mm 플러그(4극) PC 연장 케이블: 3.5mm 스테레오 및 마이크 플러

Xbox One™ or PS4™ ​ Connecting the Cloud Core 7.1 to consoles

Cloud Usage (PC) To connect the headset to your computer (or other devices) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm jacks. The audio plug, which has green stripes, plugs

Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud headset with a mobile device, simply plug the “Y” cable into the 3.5mm audio jack as seen below. (NOTE: Location of the audio jack may vary based on the model and/or brand of mobile device you are using.) The volume of the conversati

클라우드 믹스 2 공장 초기화 ​ ​ [전원] 버튼과 [다기능] 버튼을 10초 동안 길게 눌러 공장 초기화를 시작하세요. 전원 상태 LED가 빨간색과 흰색으로 깜빡이기 시작합니다.

Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB THD: < 2% • Power handling capacity: 150mW Sound coupling to the ear: Circumaural Ambient noise attenuation: Approx. 20