헤드폰

Articles - Category Page

  • Cloud Flight 2 - Controls - Multifunction button

    Single press: Play / Pause, Answer Call Double press: Skip Track, End Call, Reject Call Triple Press: Previous Track Long Press (2 seconds): Activate Voice Assistant Note: Button functionality can vary between devices and apps.

    Knowledge Base Article

  • HyperX CloudX Stinger Core Wireless LED charge status

    CHARGE STATUS LED 100% Fully Charged Solid white 15%-99% Breathing white

    Knowledge Base Article

  • Cloud II Wireless DTS Setting up DTS APO Drivers

    Plug in the USB dongle and launch NGENUITY. Click on the Headset tab. Click "Install" on the "audio Drivers Required" prompt. Wait until the drivers are finished installing. Click "OK, Will DO" on the "drivers Installed" prompt. Restart your PC.

    Knowledge Base Article

  • Cloud II Wireless DTS issues toggling DTS:X Spatial Sound or EQ on/off

    *Advanced Troubleshooting. Do not attempt if you are unsure. We highly recommend reaching out to the HyperX support team for assistance. Verify that the DTS APO service "DtsHpXV2Apo4Service" is running. Can be checked in Windows "Services" App. If DTS APO service is not running, try installing Visua

    Knowledge Base Article

  • Cloud Alpha 2 Wireless - Pairing to Base Station

    1. While the headset is powered off, hold down the power button for about 10 seconds until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. 2. While the base station is plugged in and the base station output mode switch is set to headset, hold the top 3 butto

    Knowledge Base Article

  • Cloud MIX 무선 헤드셋은 Bluetooth®를 통해 연결됩니다.

    Bluetooth®를 통한 무선 헤드셋 설정 블루투스 페어링 헤드셋 전원이 꺼진 상태에서 전원 버튼을 5초 동안 길게 누르세요. LED 표시등이 빨간색과 파란색으로 깜빡입니다. 블루투스 기능이 있는 기기에서 HyperX Cloud MIX를 검색하여 연결하세요. 연결되면 표시등 LED가 5초마다 파란색으로 깜빡입니다. 켜기/끄기 전원 켜기/끄기 - 전원 버튼을 2초 동안 길게 누르세요

    Knowledge Base Article

  • Connecting the HyperX Cloud Stinger 2 to Console

    Plug the headset into the controller via 3.5mm jack

    Knowledge Base Article

  • HyperX CloudX Stinger Core Wireless Quick Start Guide

    CloudX Stinger Core Wireless Quick Start Guide

    Knowledge Base Article

  • Cloud Alpha Wireless Playstation 5 Setup

    1. Connect the wireless USB adapter to the PlayStation 5 console. 2. Go to the home page and select Settings > Sound 3. Under Microphone set the following: Input Device to USB Headset (HyperX Cloud Alpha Wireless) 4. Under Audio Output set the following: Output Device: USB Headset (HyperX Cloud Alph

    Knowledge Base Article

  • Cloud Usage (with Control Box and Headset Splitter Cable)

    Cloud Usage (with Control Box and Headset Splitter Cable) If you are connecting the headset to a laptop or mobile device (phone or tablet) that has a single audio jack, generally marked with earphones or headset symbol. Connect the control box to the headset splitter cable. This will convert the sep

    Knowledge Base Article