Controller

LED Solid White: Connected Blinking White: Searching for USB Wireless Dongle

​​ ​ A. Analog sticks (L3/R3) B. Xbox button C. Power LED D. ABXY buttons E. View button F. D-Pad G. Share button H. Menu button I. Trigger locks J. P1 button K. P2/P3 buttons M. 3.5mm headset jack N. Triggers (LT/RT) O. USB-C port P. USB-C to USB-A Cable

HyperX Clutch Talon Factory Reset Press and hold P1+P2+P3 buttons for 5 seconds The LED will blink white and red when completed *This will clear the Bluetooth paired devices and P2/P3 custom mapping

Clutch Talon Quick Start Guide

Programmable ButtonsAssign/Re-Assign P2 & P3 Hold P1 and Release when LED is slowly flashing ​​ ​ When LED is flashing slowly, press one of the following buttons to assign. ​ ​​ ​ When LED is flashing rapidly, press either P2 or P3 to assign your selected button. ​ ​ Clear individually P2 or P3 When

No, these are standard potentiometer based Analog Sticks and Triggers.

HyperX Clutch Gladiate RGB Programmable Buttons Assign P2 / P3 Hold P1 and Release when Power LED is slowly flashing While the Power LED is flashing slowly, press one of the following buttons to assign. Clear P2 / P3 Hold P1 and Release when the Power LED is slowly flashing. Press either P2 or P3 to

Tounrament Lock LS, DPAD, RS Switch SOCD Toggle

Yes you can use multiple Clutch Gladiate RGB.

Assign/Reassign P2 and P3 Double Press P1. LED will blink Magenta While LED is blinking Magenta, press a button to assign. While LED is fast blinking Magenta, press either P2 or P3 to assign your selected button. Led will blink Green for success, blink Red for invalid selection. Clear individually P