Cloud III S Wireless

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PS5, follow the steps below: Go to the home page and select Settings > Sound. Under Microphone, set the following: Input Device: USB He

Locate the Wireless Module. Open the OMEN laptop screen. Identify the wireless receiver module located on the top right corner of the screen bezel. Set the Headset to Adapter Mode. Slide the connection mode switch on the headset to WiFi mode. With the headset in Adapter mode, hold down the power but

Double press the power button to switch between OMEN gaming laptop connection and USB wireless dongle connection.

Performing a factory reset on the headset will reset the headset to default settings, remove pairing info with paired Bluetooth devices, and remove pairing info with OMEN Instant Pair. Press and hold the Power button and Multi-function button for 10 seconds to initiate factory reset. The power statu

Slide the mode switch to the Bluetooth icon. The headset will enter Bluetooth pairing on the first setup. Power on the headset. Go to your device Bluetooth settings, search, and connect to “HyperX Cloud III S Wireless”. ​

The Cloud III S Wireless is **not** compatible with Xbox.

요약: 무선 동글이 PS5 또는 다른 기기에서 작동하지 않지만 다른 기기에서는 정상적으로 작동하는 경우, 외부 전원 공급 방식의 USB 허브를 사용해 보세요. 반드시 외부 전원 공급 방식의 허브여야 합니다. 그래도 문제가 해결되지 않으면 고객 지원팀에 문의해 주세요. 케어팀. 무선 USB 동글을 사용하는 무선 제품(특히 헤드셋)을 PS5에 연결하여 사용하려고 할 때, PS5가 USB를 인식하지 못하는 문제가 발생할 수 있습니다. USB 동글을 PS5에 연결하면 USB 동글의 LED 표시등에 불이 들어와야 합니다. 불이 들어오지 않으

Power off the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with the connector. Place new battery

It is recommended to fully charge your headset before first use. To charge the headset, plug the headset to a USB port with the included USB-C charge cable. When charging the headset, the headset status LED will indicate the current charge status. Charge Status Status LED Fully Charged Solid green 6

In NGENUITY software, the headset can be set to prioritize voice notifications or tone notifications. If voice prompts are set to off, the headset will switch to tones for the following notifications: Power on / off Adapter connected / disconnected Bluetooth connected / disconnected Volume at minimu