Cloud Alpha Family

3.5mm 잭을 USB 동글의 암컷 단자에 꽂고, USB 동글의 수컷 단자를 시스템(PC)에 꽂으십시오.

Usage (mobile device) To use the headset with a mobile device (or other device) with a headset jack (4 pole CTIA), connect the 3.5mm plug directly into the headset jack on your device.

Single Press: Play / Pause, Answer Call Double Press: Skip Track, End Call, Reject Call Triple Press: Previous Track Long Press (2 seconds): Activate Voice Assistant Note: Button functionality can vary between devices and apps.

마이크 음소거 버튼 3.5mm 헤드셋 잭 마이크 포트 볼륨 휠 탈착식 마이크 마이크 음소거 LED 3.5mm PC 연장 케이블 USB 동글 USB-C-USB-A 어댑터 분리형 3.5mm 케이블 (5극-4극)

Power OFF the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with a connector. Place new battery ma

Cloud Alpha Wireless Quick Start Guide

Cloud Alpha S Quick Start Guide

Cloud Alpha Wireless Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Form factor: Over ear, circumaural, closed back Frequency response: 15 Hz – 21 kHz Impedance: 62 Ω Sensitivity: 103 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Aluminum Ear cushions: Memory foam and premium lea

3.5mm 잭을 시스템(PC, 컨트롤러)에 연결하세요.

NGENUITY should automatically swap back to the hardware audio endpoints when the software and audio engine are not running. Check Windows sound settings and make sure the following devices are assigned correctly to the hardware endpoints: Default playback device: Headphones (HyperX Cloud Alpha 2 Wir