QuadCast Family

Hold and turn gently to remove or attach microphone to the shock mount.

Note: The LED ring will present the polar pattern status 3 seconds when switching the polar pattern then shows the current light effect, but the LED will be turned off when muting the microphone.

​ ​ A. Tap-to-Mute Sensor B. Gain Control Knob C. Polar Pattern Knob D. Headphone Jack E. USB Cable Port F. USB Cable G. Mount Adapter* *Supports both 3/8” and 5/8” thread sizes

QuadCast 2は、マイクの前面を音源に向けるように設置してください。HyperXロゴがある面が前面です。 ​

*HyperX Cloud III Wired Not Included ​

A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter

​​ Connect the microphone to a USB port on the PS4 with the included USB cable. To ensure the microphone is configured with the most optimal settings on the PS4, follow the steps below: From the PS4 main menu, go to Settings > Devices > Audio Devices Set Input Device to USB Headset (HyperX QuadCast)

多機能コントロールボタンとタップミュートセンサーを長押しすると、 10秒 マイクを工場出荷時設定にリセットします。すべての赤色LED（含まない 工場出荷時設定へのリセットがトリガーされると、上部の LED リングが点滅します。

Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will indicate the current mute status. ​

Installing Quadcast S Microphone the Mount Adapter Secure the included mount adapter onto a microphone boom arm. The mount adapter supports 3/8" and 5/8" thread sizes. Remove both the thumbscrew and nut from the microphone stand. Remove the microphone stand from the microphone. Align the mount adapt