Quadcast 2 Series

A. Tap-to-Mute Sensor B. LED ring C. Multifunction control D. 3.5mm headphone port E. USB-C port F. USB-C to USB-C cable G. USB-C to USB-A adapter

QuadCast 2 接続ヘッドフォン *HyperX Cloud III Wiredは付属しません ​

QuadCast 2 S can be removed from its stand and used with microphone mounts with either 3/8” or 5/8” threads. ​

Note: The LED ring will present the polar pattern status 3 seconds when switching the polar pattern then shows the current light effect, but the LED will be turned off when muting the microphone.

Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will indicate the current mute status. ​

Press and hold the multifunction control button and tap-to-mute sensor for 10 seconds to factory reset the microphone. All red LEDs (include the top LED ring) will flash when the factory reset has been triggered.

QuadCast 2 Sは、マイクの前面を音源に向けるように設置してください。HyperXロゴがある面が前面です。 ​

Why doesn’t QuadCast 2 S work with Sony PlayStation or Nintendo Switch? The QuadCast 2 S leverages USB Audio Class 2 (UAC-2) technology to deliver audio quality, supporting bit depths beyond 24-bit and sampling rates above 96 kHz. Unlike its predecessor, UAC-1, UAC-2 also accommodates additional aud

多機能ボタンを押すと、調整モードが切り替わります。[マイクロフォン]そして[ヘッドセット]LEDです。 マルチファンクション コントロールの LED リングには、現在選択されているモードの設定が表示されます。 ​

Connect directly to computer's USB ports to use microphone.