ヘッドセット

アダプターモード 1. モードスイッチをワイヤレスモードにスライドします。 2. USBワイヤレスドングルをPCまたはゲーム機に接続します。 3. ヘッドセットの電源を入れます。 Bluetoothモード 1. モードスイッチをBluetoothモードに切り替えます。初回設定時にはヘッドセットが青色に点滅します。 2. デバイスのBluetooth設定を開き、「HyperX Cloud Jet」を検索して接続します。 Bluetoothペアリング 1. モードスイッチをBluetoothモードにスライドします。電源 オフ ヘッドセット。 2. 多機能ボタンを5秒間押し続けます。LEDが青色に点

It is recommended to fully charge your headset before first use. ​ Charge Status Status LED Fully Charged Solid Green 61% - 99% Breathing Green 21% - 60% Breathing Yellow < 20% Breathing Red

Performing a factory reset on the headset will reset the headset and base station to default settings and remove pairing info with paired Bluetooth devices. To perform the factory reset from the headset side: Press and hold the power button and the multifunction button for 10 seconds to initiate fac

HYPERX CLOUD VIRTUAL 7.1 SURROUND SOUND – USCCPSS Firmware Update Rev. 0010 Part Numbers: HX-USCCPSS-BK HX-HSCC-2-BK Description: This firmware update improves compatibility for the Cloud Virtual 7.1 Surround Sound USB audio adapter on console systems. This update can also be used on the USB audio a

USB-C port: Connect to any supported system for use in adapter mode eg. PC, PlayStation 5. 3.5mm line out: Output playback audio through line out to a supported device eg. powered speakers, when the base station is set to line out mode. 3.5mm line in: Mix in audio from a supported device eg. Switch

Cloud Alpha 2 Wireless - Firmware v124 Change log Resolved an issue where devices failed to communicate properly with NGENUITY after resuming from sleep mode. Fixed a bug where lighting settings were not being saved on DAC keys. Addressed issue where Bluetooth functionality could fail when charging

1. While the headset is powered off, hold down the power button for about 10 seconds until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. 2. While the base station is plugged in and the base station output mode switch is set to headset, hold the top 3 butto

Cloud Stinger Core 7.1 Overview ​ A. Swivel to mute microphone B. Volume Wheel C. 3.5mm (4-pole) plug D. USB Adapter

Cloud Flight 2 QSG

Volume Wheel - Scroll up or down to adjust the volume level