ヘッドセット

Manually Pairing the Headset and USB Adapter The headset and USB adapter are automatically paired together out of the box. But if the manual pairing is needed, follow the steps below to pair the headset and USB adapter. 1. Power on the headset 2. While the USB adapter is plugged in, use a small tool

Go to Sound Settings and set the Output device to HyperX CloudX Flight 2 Wireless and Input device to HyperX CloudX Flight 2 Wireless

Wireless Dongle Method 1. While the headset is off, hold the power button until the headset status LED starts blinking red/green rapidly. 2. While the wireless dongle is plugged in, use a small tool to hold down the pairing button inside the pin hole until the dongle LED starts blinking rapidly. The

Press and hold the mic mut button for 2 seconds to toggle mic monitoring on/off

The CloudX Stinger Core Wireless headset is designed to be used with the Xbox console out of the box. You can use it on the PC with Microsoft's Xbox Wireless adapter (sold separately).

クラウドオービットの仕様 ヘッドホン ドライバー：平面トランスデューサー、100 mm タイプ：耳覆い型、密閉型 周波数特性：10Hz～50,000Hz 音圧レベル：>120 dB 全高調波歪率：< 0.1%（1 kHz、1 mW） 重量：368g ケーブル長：USB Type-C - USB Type-A：3m、USB Type-C - USB Type-C：1.5m、3.5mmプラグ（4極）：1.2m マイクロフォン 構成要素：エレクトレットコンデンサーマイクロホン 指向性パターン：単方向 バッテリー寿命 アナログ3.5mmモード：10時間*ヘッドホン音量50%でテスト済み

Slide the wireless mode switch to Bluetooth mode. Press and hold both the power button and the multifunction button for 2s. Pairing mode is active when the LED blinks blue and the voice prompt says, "Bluetooth pairing". Go to your device’s Bluetooth settings and connect to “HyperX CloudX Flight 2 Wi

Single Press: Play / Pause, Answer Call Double Press: Skip Track, End Call, Reject Call Triple Press: Previous Track Long Press (2 seconds): Activate Voice Assistant Note: Button functionality can vary between devices and apps.

Right-click on the sound icon in the system tray and select sound settings. Set the output device to Headphones (HyperX CloudX Stinger 3 Wireless). Set the input device to Microphone (HyperX CloudX Stinger 3 Wireless).

To enable/disable mic monitoring on HyperX CloudX Flight, press and hold the Microphone Mute button for 3 seconds.