ヘッドセット

Setting up with PlayStation 4 1. Set Input Device to USB Headset (HyperX Cloud Flight S) 2. Set Output Device to USB Headset (HyperX Cloud Flight S) 3. Set Output to Headphones to All Audio 4. Set Volume Control (Headphones) to the maximum.

クラウドリボルバー/リボルバーSの技術仕様 ヘッドホン ドライバー：ダイナミック型、50mmネオジム磁石搭載 タイプ：耳覆い型、密閉型 周波数特性：12Hz～28,000Hz インピーダンス：30Ω 音圧レベル：1kHzで100.5dBSPL/mW 全高調波歪率：2%未満 入力電力：定格30mW、最大500mW 重量：360g マイク込み重量：376g ケーブル長：ヘッドセット（1m）、USBオーディオコントロールボックス（2.2m）*** 接続：ヘッドセット - 3.5mmプラグ（4極） USBオーディオコントロールボックス - USB*** マイクロフォン 構成要素：エレクトレットコンデン

Headphone Driver: Dynamic, 50mm with Neodymium magnets Form factor: Closed Back Frequency response: 10 Hz - 20.2 kHz Impedance: 32 Ω Sensitivity: 104.5 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Plastic Ear cushions: Memory foam and premium leatherette Microphone Element: Electret condenser micropho

Cloud Flight Quick Start Guide

Mic mute / Mic monitoring button Mic mute toggle - Press the button to turn the mic mute on/off Mic monitoring toggle – Hold the button for 3 seconds to toggle mic monitoring on/off

Setting up with PC 1. Connect the wireless USB adapter to the PC. 2. Power on the headset. 3. Right-click Speaker icon > Select Sounds 4. Under the Playback tab, click on “HyperX Cloud Core Wireless” and click on the Set Default button. 5. Under the Recording tab, click on “HyperX Cloud Core Wireles

Using with console & mobile Connect the headset to the device’s 3.5mm port with the 3.5mm (4-pole) cable.

Power off the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with the connector. Place new battery

Charging the Headset It is recommended to fully charge your headset before first use. When charging the headset, the headset status LED will indicate the current charge status. Qi wireless charging To charge the headset via Qi wireless, place the left earcup onto a Qi wireless charging base. Wired c

Using Xbox One® 1. Connect the wireless adapter to a USB port on the Xbox One® system. 2. Power on the headset. 3. When the wireless adapter status light is solid, the headset is now connected to the adapter. 4. If logged in with an account, the Xbox One® will assign the headset to that account and