Controller

Set the controller to Xbox or 1k mode and hold down the P1 button for 10 seconds. Press the pinhole connect button on the usb dongle.

Toggle the switch to 1k polling mode on the controller

To toggle the controller on / off when in 2.4G or Bluetooth mode, press the Home button. The controller will attempt to connect to your device. The controller will automatically shut off after 5 minutes of inactivity. To switch to Handheld mode, attach the mobile clip and insert a phone. ​ ​​ ​ Fold

A. Tournament Lock Switch B. LS, DPAD, RS Switch C. SOCD LEDs D. SOCD Toggle E. View Button F. Share Button G. Menu Button H. Xbox Button I. Top Plate J. Pudding Keycaps K. HyperX Magnetic Switches L. USB-C Port M. RGB/ Profile Toggle N. Stand Feet O. USB-C to USB-A Cable

Move slider to unlock or reduce trigger motion

1. Remove trigger pieces, rear paddles, and magnetic back plate 2. Remove the product sticker. 3 Torx 6 (T6) screws are located behind the sticker. •2 T6 Screws are near the top magnet •1 T6 Screw in between P2 and P3 3. Grip the edge of the exposed trigger area and pull the side controller grip apa

Go to hyperx.com/ngenuity to download the NGENUITY software. NGENUITY software features include: • RGB lighting customization • Button remapping • Switch actuation • SOCD settings Buttons and Top Plate file Download File downloads also available at Printables

LED Solid White: Connected Blinking White: Searching for USB Wireless Dongle

​​ ​ A. Analog sticks (L3/R3) B. Xbox button C. Power LED D. ABXY buttons E. View button F. D-Pad G. Share button H. Menu button I. Trigger locks J. P1 button K. P2/P3 buttons M. 3.5mm headset jack N. Triggers (LT/RT) O. USB-C port P. USB-C to USB-A Cable

HyperX Clutch Talon Factory Reset Press and hold P1+P2+P3 buttons for 5 seconds The LED will blink white and red when completed *This will clear the Bluetooth paired devices and P2/P3 custom mapping