Cloud Flight Family

Charging It is recommended to fully charge your headset before first use. When the charging cable is connected the ear cup LED will indicate the status. Power Power on - Hold down power button for 3 secs until you hear a beep. Power off - Hold down power button for 3 secs until you hear a beep. LED

Cloud Flight S Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 10Hz–20kHz Impedance: 32 Ω Sound pressure level: 99.5dBSPL/mW at 1kHz T.H.D.: < 1% Weight: 310g Weight with mic: 320g Cable length and type: USB charge cable (1m) M

最適な条件下での有効な無線通信範囲は20メートル（65フィート）です。障害物や他の無線信号からの干渉などの環境条件によって、有効範囲は狭まります。

Read all instructions below, before attempting to replace the battery. Power OFF the headset. Carefully pull the right ear cushion from the headset. Note how it's slotted into the earcup. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover fro

Cloud Flight 2 User Manual

Slide the headset wireless mode switch to the WiFi symbol. Connect the USB wireless dongle to your device. Power ON the headset.

Yes. However, for best user experience we do not recommend charging the headset during use due to possible white noise (static).

CloudX Flight 2 User Manual

If the light on the headset is turned off and the volume is at 50%, the battery should last about 30 hours. The battery will drain faster if you have the volume higher or the lighting effects turned on. By default, the light will be on when the headset is turned on. Short press the power button to t

Manually Pairing Headset and Wireless Adapter The headset and wireless adapter are already paired together for first-time use. If manual pairing is necessary, follow the steps below to pair the headset and wireless adapter together. 1. Make sure the headset is powered off. 2. Plug the USB wireless a