Microfono

Plug the provided USB-C to USB-A cable into the microphone and PC or console

HyperX Quadcast 2 User Manual

Per attivare/disattivare il monitoraggio del microfono, tenere premuto il pulsante multifunzione e toccare il sensore "tap-to-mute".

Press and hold the multifunction control button and tap-to-mute sensor for 10 seconds to factory reset the microphone. All red LEDs (include the top LED ring) will flash when the factory reset has been triggered.

Selecting a Polar Pattern ​ Rotate the polar pattern knob to select one of the four polar patterns. ​ Adjusting Gain Control ​ Rotate the gain control knob to adjust the gain of the microphone. Muting the Microphone ​ Tap the top of the microphone to mute/unmute the microphone. The microphone LED wi

PC - The Quadcast's mic monitoring can be disabled by going to Control Panel>Sound>Recording. Select the HyperX microphone and click Properties. Select the Listen tab and then disable "Listen to this device." The Quadcast S can be adjusted through Ngenuity under the Mic monitoring feature MAC - Open

​MICROFONO HYPERX SOLOCAST - Aggiornamento firmware HMIS1X Rev. 4104, 4106 Numeri di parte: HMIS1X-XX-BK/G Descrizione: Queste opzioni del firmware consentono agli utenti di disattivare il LED di stato lampeggiante quando il microfono è disattivato (v4.1.0.6) o di ripristinare il LED di stato al suo

Guida rapida di SoloCast 2

Hold and turn gently to remove or attach microphone to the shock mount.

Quadcast User Manual