Controller

Clutch Talon Quick Start Guide

Programmable ButtonsAssign/Re-Assign P2 & P3 Hold P1 and Release when LED is slowly flashing ​​ ​ When LED is flashing slowly, press one of the following buttons to assign. ​ ​​ ​ When LED is flashing rapidly, press either P2 or P3 to assign your selected button. ​ ​ Clear individually P2 or P3 When

No, these are standard potentiometer based Analog Sticks and Triggers.

HyperX Clutch Gladiate RGB Programmable Buttons Assign P2 / P3 Hold P1 and Release when Power LED is slowly flashing While the Power LED is flashing slowly, press one of the following buttons to assign. Clear P2 / P3 Hold P1 and Release when the Power LED is slowly flashing. Press either P2 or P3 to

Tounrament Lock LS, DPAD, RS Switch SOCD Toggle

Yes you can use multiple Clutch Gladiate RGB.

Assign/Reassign P2 and P3 Double Press P1. LED will blink Magenta While LED is blinking Magenta, press a button to assign. While LED is fast blinking Magenta, press either P2 or P3 to assign your selected button. Led will blink Green for success, blink Red for invalid selection. Clear individually P

Yes. The button mappings will be saved and can be carried over to another system.

Clutch Tanto User Manual

Calibration Calibration can address issues related to analog sticks and triggers. To activate calibration mode: Set the mode selection switch to USB. Hold down Start and Select. While still holding down both buttons from the previous step, plug in the USB-C cable. Continue holding down both buttons