Cloud III S Wireless

Double press the power button to switch between OMEN gaming laptop connection and USB wireless dongle connection.

The Cloud III S Wireless is **not** compatible with Xbox.

Slide the mode switch to the Bluetooth icon. The headset will enter Bluetooth pairing on the first setup. Power on the headset. Go to your device Bluetooth settings, search, and connect to “HyperX Cloud III S Wireless”. ​

Power off the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with the connector. Place new battery

It is recommended to fully charge your headset before first use. To charge the headset, plug the headset to a USB port with the included USB-C charge cable. When charging the headset, the headset status LED will indicate the current charge status. Charge Status Status LED Fully Charged Solid green 6

Slide the mode switch to the Bluetooth icon. Press and hold the Power and Multifunction buttons for 2 seconds to enter Bluetooth pairing mode. Pairing mode is active when the LED blinks blue and the voice prompts says "Bluetooth pairing". ​ ​Go to your device Bluetooth settings, search, and connect

*This method is only possible if the OMEN laptop has already previously paired with a compatible Instant Pair headset. Open the NGENUITY software. Go to the Settings tab. Under “Connected Hardware,” select HyperX Wireless Embedded Receiver. Click Pair new headset to set the OMEN system in pairing mo

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. Set Input Device to USB Headset (HyperX Cloud III S Wireless). Set Output Device to USB Headset (HyperX Cloud III S Wireless). Set Output to Headphones to All Audio. Set Volume Control (He

While the headset is powered off and in adapter mode, hold down the power button until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (e.g. paper clip, SIM tray ejector, etc.) to hold down the bu

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. ​