Cloud Flight Series

Charging It is recommended to fully charge your headset before first use. When the charging cable is connected the ear cup LED will indicate the status. Power Power on - Hold down power button for 3 secs until you hear a beep. Power off - Hold down power button for 3 secs until you hear a beep. LED

Cloud Flight S Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 10Hz–20kHz Impedance: 32 Ω Sound pressure level: 99.5dBSPL/mW at 1kHz T.H.D.: < 1% Weight: 310g Weight with mic: 320g Cable length and type: USB charge cable (1m) M

20 meters (65 feet) is the effective wireless range in optimal conditions. Environmental conditions such as obstacles, interference from other wireless signals, etc., will reduce the effective range

Yes. However, for best user experience we do not recommend charging the headset during use due to possible white noise (static).

If the light on the headset is turned off and the volume is at 50%, the battery should last about 30 hours. The battery will drain faster if you have the volume higher or the lighting effects turned on. By default, the light will be on when the headset is turned on. Short press the power button to t

Manually Pairing Headset and Wireless Adapter The headset and wireless adapter are already paired together for first-time use. If manual pairing is necessary, follow the steps below to pair the headset and wireless adapter together. 1. Make sure the headset is powered off. 2. Plug the USB wireless a

Manually Pairing the Headset and USB Adapter While the headset is powered off, hold down the power button until the headset earcup LEDs starts blinking rapidly. The headset is now in pairing mode. While the USB adapter is plugged in, use a small tool (e.g. paper clip, SIM tray ejector, etc.) to hold

To set up the Cloud Flight for PS headset on the PS4/PS5 consoles, please perform the following: Go to the sound/audio devices settings in the console settings 1. Set Input Device to USB Headset (HyperX Cloud Flight for PS) 2. Set Output Device to USB Headset (HyperX Cloud Flight for PS) 3. Set Outp

Cloud Flight Quick Start Guide

Setting up with PlayStation 4 1. Set Input Device to USB Headset (HyperX Cloud Flight S) 2. Set Output Device to USB Headset (HyperX Cloud Flight S) 3. Set Output to Headphones to All Audio 4. Set Volume Control (Headphones) to the maximum.