Cloud Flight Series

The headset can be used as a wired headphone with a 3.5mm cable (not included). To use the headset in wired headphone mode: 1. Connect the 3.5mm headphone cable to the headphone port on the headset 2. Plug the 3.5mm headphone cable into your device Note: The microphone and volume wheel are not funct

You can only use the Cloud Flight microphone in wireless mode. Connecting the headset via 3.5mm jack will give you audio out.

Although Cloud Flight S is compatible with PS4, the chat mixer feature is only supported on PC.

​ Power Status Beep Tone Indicator Power on One tone (high) Power off Two tones (high, low) Volume Status Beep Tone Indicator Setting to 100% maximum volume Three tones (high) Setting to 0% minimum volume Three tones (low) Microphone Mute Status Beep Tone Indicator Microphone muted Two tones (high)

Headset Charging When the headset is connected to a charger with the USB charge cable, the ear cup LEDs will indicate the charge status.

Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 20Hz–20,000Hz Impedance: 32 Ω Sound pressure level: 113dBSPL/mW at 1kHz T.H.D.: < 2% Weight: 288g Weight with mic: 298g Cable length and type: USB charge cable (1m) Microphone Ele

This may be caused by environmental interference around where the USB adapter is plugged in. Below are some tips that may help address this issue: Avoid plugging the dongle into USB hubs near other peripherals. This is especially true when using externally-powered hubs or accessories, as the electri

To enable/disable mic monitoring on Cloud Flight S, press the mic monitoring toggle pictured below.

HyperX Cloud Flight User Manual

Cloud Flight S Controls Mic monitoring toggle Press to toggle mic monitoring on/off. Game/Chat balance Press to adjust mix between game audio and chat audio. *The game/chat balance functionality operates independently from the overall headset audio volume. *Game/chat balance function is unavailable