Cloud Family

Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz (earphones) Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB T.H.D: < 2% Power handling capacity: 150mW • Sound coupling to the ear: Circumaural Ambient noise attenuati

Usage (PlayStation® 4) To use the HyperX Cloud Core headset with PlayStation 4 (PS4™), connect the 3.5mm jack on the headset directly to the PS4 game controller and follow these steps: 1. Turn on your PS4 game console. 2. Navigate to the Settings menu and select it. 3. Highlight the ‘Devices’ menu o

In NGENUITY software, nagivate to the Settings tab. Under "Connected Hardware", find "HyperX Internal Wireless Audio Adapter" and click on "Initiate Pairing Mode". Click on the "Start Pairing" button. The laptop is now in pairing mode. While the headset is powered off, hold down the power button unt

1. Go to the home page and select Settings > Sound 2. Under Microphone, set the following: Input Device to USB Headset (HyperX Cloud Core Wireless) 3. Under Audio Output, set the following: Output Device: USB Headset (HyperX Cloud Core Wireless) Output to Headphones: All Audio 4. Under Volume, set H

Cloud Core Wireless DTS Overview ​ A. Status LED B. Power Button C. Mic Mute / Mic Monitoring button D. Volume Wheel E. USB-C Charge Port F. Microphone Port G. Detachable Microphone H. USB Adapter I. Wireless Pairing Pin Hole J. Wireless Status LED K. USB-C Charge Cable L. DTS Instruction Card

Using with Xbox, PlayStation, or Nintendo Switch ​

Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB THD: < 2% • Power handling capacity: 150mW Sound coupling to the ear: Circumaural Ambient noise attenuation: Approx. 20

​ A. Mic mute button B. Microphone port C. Volume Wheel D. Detachable Microphone E. Microphone Mute LED F. USB Dongle G. USB-C to USB-A Adapter

In-line audio control operation The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone. To increase the headset volume rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume

Cloud Core User Manual