Cloud Alpha 2 Series

Cloud Alpha 2 Wireless - Firmware v124 Change log Resolved an issue where devices failed to communicate properly with NGENUITY after resuming from sleep mode. Fixed a bug where lighting settings were not being saved on DAC keys. Addressed issue where Bluetooth functionality could fail when charging

Cloud Alpha 2 Wireless User Manual

USB-C port: Connect to any supported system for use in adapter mode eg. PC, PlayStation 5. 3.5mm line out: Output playback audio through line out to a supported device eg. powered speakers, when the base station is set to line out mode. 3.5mm line in: Mix in audio from a supported device eg. Switch

Performing a hardware reset on the headset will do a soft reset on all the internal hardware. This may be useful if the headset has unusual behavior, such as unresponsive controls. To perform a hardware reset, press and hold the mic mute button and the multifunction button for 5 seconds. The headset

It is recommended to fully charge your headset before first use. Charge Status Status LED Fully Charged Solid Green 61% - 99% Breathing Green 21% - 60% Breathing Yellow < 20% Breathing Red

A. Line out / headset mode switch: Switch audio between 3.5mm line out or headset. B. Volume wheel: Rotate wheel to adjust playback volume level. C. Mic mute: Press button to toggle mic mute on / off. D. Buttons Mic gain: Rotate wheel to adjust mic gain level. Game / Chat mix: Rotate wheel to adjust

Use cable to connect the headset and devices directly with 3.5mm jacks.

Power OFF the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with a connector. Place new battery ma

Status Adapter Mode Dual Mode Pairing Fast blinking white Fast blinking blue Searching Blinking white Blinking purple Connected Solid-fade white for 5 seconds Solid-fade purple for 5 seconds

A. Status LED B. Power button C. Mic mute / monitoring button D. 3.5mm headset jack E. USB-C charge port F. Microphone poort G. Wireless mode switch H. Multifunction button I. Volume wheel J. Base station K. Base station USB-C port L. 3.5mm line out port M. 3.5mm line in port N. Detachable microphon