Pulsefire Haste 2 Series

To reset the mouse's Instant Pair pairing table: Clear the Laptop's pairing table first. On the compatible OMEN laptop it's paired to via Instant Pair, go into NGENUITY. Go into NGENUITY Settings. Find the mouse in the device list, and click Forget Device. Clear the mouse's pairing table: Also insid

This specific process will only work if the mouse and the OMEN Laptop have never paired with each other. Additionally, the firmware of the mouse must be version 1121 or higher. Move the mouse close to the compatible OMEN Laptop, within 20cm or less. The module the mouse needs to pair with is located

2.4G Wireless Mode Switch the mouse to 2.4G power mode. Connect the USB wireless dongle to the extension adapter. Connect the extension adapter to a PC or game console using the included USB cable. For optimal placement, keep the wireless adapter within 20cm of the mouse. ​​ Bluetooth Mode (NGENUITY

1. Turn Off the Mouse. Switch power mode to "OFF". 2. Remove the PTFE Skates with a flat, plastic tool (e.g. spudger, fingernails) to reveal the 4x Torx 6 Security Screws below the feet. 3. Gently separate and lift the top shell from the bottom shell, in an upward motion 4. Locate and remove the bat

What's the difference of battery life when using 1000Hz and 4000Hz Polling Rate? 1000Hz: Up to 90 Hours 4000Hz: Up to 30 Hours This was tested continuously while turning off all the lighting and paired wirelessly. Your experience will vary based on your usage!

HyperX Pulsefire Haste 2 Pro User Manual

To force the mouse to connect via Instant Pair to a compatible system: Move the mouse power switch to “OFF”. Hold the “Back Button” on the mouse. While holding the Back Button, move power switch to “2.4G”. The mouse will blink Orange four times when successfully connected to the compatible system vi

Pulsefire Haste 2 Core Wireless Firmware Update 4102 (Dongle) 1106 (Mouse) Description: 1. Modify abnormal power consumption after battery cutoff and battery power display problem. 2. Fixed an issue where the mouse would sleep when pressing keys. Firmware Updater 1106 Firmware Updater 4102

Pulsefire Haste 2 Core Wireless 2.4G Bluetooth Mode *NGENUITY is not compatible with Bluetooth mode. Switch the mouse to Bluetooth power mode. The mouse will flash blue on the first setup. Go to your computer’s Bluetooth settings, search, and connect to “Haste 2 Core." ​​ Bluetooth Pairing To place

To customize lighting, DPI, macro settings, and more, download HyperX NGENUITY software at: NGENUITY