Mikropon

Ketuk bagian atas mikrofon untuk membisukan/mengaktifkan mikrofon. LED status mikrofon akan menunjukkan status bisu saat ini. LED - Nyala - Mati Senyap LED - MATI - Matikan Suara

Tekan tombol multifungsi untuk beralih di antara mode penyesuaian. Putar kenop ke tingkat yang diinginkan. ​​ *Diperlukan koneksi 3,5 mm ​ DIPIMPIN Mikrofon Aktif - Headset Nonaktif = Sesuaikan Penguatan Mikrofon Mikrofon Mati - Headset Hidup = Sesuaikan Volume Pemutaran Mikrofon Aktif - Headset Akt

Ketuk bagian atas mikrofon untuk membisukan/mengaktifkan mikrofon. LED indikator status mikrofon akan menunjukkan status bisu saat ini. ​

​ Connect headphones to the headphone jack on the microphone for microphone monitoring and playback audio.

PC - The Quadcast's mic monitoring can be disabled by going to Control Panel>Sound>Recording. Select the HyperX microphone and click Properties. Select the Listen tab and then disable "Listen to this device." The Quadcast S can be adjusted through Ngenuity under the Mic monitoring feature MAC - Open

Microphone Power consumption: 5V 220mA (white light) Sample/bit rate: 48kHz/16-bit Element: Electret condenser microphone Condenser type: Three 14mm condensers Polar patterns: Stereo, Omnidirectional, Cardioid, Bidirectional Frequency response: 20Hz - 20kHz Sensitivity: -36dB (1V/Pa at 1kHz) Cable l

FlipCast Quick Start Guide

Selecting a Polar Pattern ​ Rotate the polar pattern knob to select one of the four polar patterns. ​ Adjusting Gain Control ​ Rotate the gain control knob to adjust the gain of the microphone. Muting the Microphone ​ Tap the top of the microphone to mute/unmute the microphone. The microphone LED wi

A. Ketuk untuk Mematikan Suara Sensor B. LED Status Mikrofon C. Basis Mikrofon D. Penyesuaian Kemiringan E. Port USB-C F. Dudukan Penyangga G. Kabel USB-C

Quadcast Quick Start Guide