Pulsefire Haste 2 Pro

A. Left Click Button B. Right Click Button C. Mouse Wheel D. DPI Button E. Forward Button F. Back Button G. Magnetic Battery Cover H. HyperX 26k Sensor I. Power Mode Switch J. USB Wireless Dongle Storage K. Grip Tape L. Mouse Skates M. USB 4K Wireless Dongle N. Extension Adapter O. USB Charge/Data C

Does the Haste 2 Pro support dust or water resistance? It does not! Please do not test this in any method or else it will void your warranty.

It is recommended to charge your mouse fully before your first use. Connect the mouse to a PC or game console using the USB cable. USB data connectivity will override the selected power mode, forcing the mouse into a wired configuration. The mouse is charged via USB-C, located at the top of the mous

To perform a Factory Reset of the Pulsefire Haste 2 Pro: Hold DPI button and Scroll wheel for 5 seconds. The scroll wheel will flash red 2 times momentarily and disappear once reset has completed. This will reset the following on the mouse: DPI to 800 and 4 profiles Polling Rate to 1000Hz on 2.4GHz

The default polling rate is 1k polling rate. Enable 4k Wireless Polling Rate 1. Power off the mouse completely. 2. Press and hold the DPI button. 3. While holding the DPI button, switch the mouse to 2.4G mode. The wheel LED will fast-blink green four times. To revert to the default 1k polling rate,

To place Pulsefire Haste 2 Pro Wireless into Bluetoogh Pairing Mode. Move mouse power switch to bluetooth icon. Hold the left mouse button, right mouse button, and DPI button simutaneously until the mouse flashes blue. The scroll wheel will flash blue, indicating it is in Pairing Mode. ​ Pairing Mod

The HyperX 26K sensor is our custom variant to the PixArt PAW3395.

To reset the mouse's Instant Pair pairing table: Clear the Laptop's pairing table first. On the compatible OMEN laptop it's paired to via Instant Pair, go into NGENUITY. Go into NGENUITY Settings. Find the mouse in the device list, and click Forget Device. Clear the mouse's pairing table: Also insid

This specific process will only work if the mouse and the OMEN Laptop have never paired with each other. Additionally, the firmware of the mouse must be version 1121 or higher. Move the mouse close to the compatible OMEN Laptop, within 20cm or less. The module the mouse needs to pair with is located

What's the difference of battery life when using 1000Hz and 4000Hz Polling Rate? 1000Hz: Up to 90 Hours 4000Hz: Up to 30 Hours This was tested continuously while turning off all the lighting and paired wirelessly. Your experience will vary based on your usage!