Souris

Pulsefire Haste DPI Settings

Grip Tape Optionally install the included grip tape for added control and comfort. Attach the grip tape for the left and right mouse buttons with the pointed end facing the forward direction of the mouse. ​​ Replacement Skates Pulsefire Haste includes an extra set of PTFE skates in case the preinsta

To reset the mouse's Instant Pair pairing table: Clear the Laptop's pairing table first. On the compatible OMEN laptop it's paired to via Instant Pair, go into NGENUITY. Go into NGENUITY Settings. Find the mouse in the device list, and click Forget Device. Clear the mouse's pairing table: Also insid

This specific process will only work if the mouse and the OMEN Laptop have never paired with each other. Additionally, the firmware of the mouse must be version 1121 or higher. Move the mouse close to the compatible OMEN Laptop, within 20cm or less. The module the mouse needs to pair with is located

1. Turn Off the Mouse. Switch power mode to "OFF". 2. Remove the PTFE Skates with a flat, plastic tool (e.g. spudger, fingernails) to reveal the 4x Torx 6 Security Screws below the feet. 3. Gently separate and lift the top shell from the bottom shell, in an upward motion 4. Locate and remove the bat

2.4G Wireless Mode Switch the mouse to 2.4G power mode. Connect the USB wireless dongle to the extension adapter. Connect the extension adapter to a PC or game console using the included USB cable. For optimal placement, keep the wireless adapter within 20cm of the mouse. ​​ Bluetooth Mode (NGENUITY

A. Left-click button B. Right-click button C. Mouse wheel D. DPI button E. Forward button F. Back button G. Optical gaming sensor H. Grip tape I. Mouse skates

What's the difference of battery life when using 1000Hz and 4000Hz Polling Rate? 1000Hz: Up to 90 Hours 4000Hz: Up to 30 Hours This was tested continuously while turning off all the lighting and paired wirelessly. Your experience will vary based on your usage!

HyperX Pulsefire Haste 2 Pro User Manual

To force the mouse to connect via Instant Pair to a compatible system: Move the mouse power switch to “OFF”. Hold the “Back Button” on the mouse. While holding the Back Button, move power switch to “2.4G”. The mouse will blink Orange four times when successfully connected to the compatible system vi