Casque-micro

Usage (Xbox One™) To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox One™ controller* If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox On

Volume Wheel - Scroll up or down to adjust volume level

Mode adaptateur 1. Faites glisser le commutateur de mode sur le mode Sans fil. 2. Connectez le dongle sans fil USB à un PC ou à une console de jeux. 3. Mettez le casque sous tension. Mode Bluetooth 1. Faites glisser le commutateur de mode sur le mode Bluetooth. Le casque clignotera en bleu lors de l

It is recommended to fully charge your headset before first use. ​ Charge Status Status LED Fully Charged Solid Green 61% - 99% Breathing Green 21% - 60% Breathing Yellow < 20% Breathing Red

Performing a factory reset on the headset will reset the headset and base station to default settings and remove pairing info with paired Bluetooth devices. To perform the factory reset from the headset side: Press and hold the power button and the multifunction button for 10 seconds to initiate fac

HYPERX CLOUD VIRTUAL 7.1 SURROUND SOUND – USCCPSS Firmware Update Rev. 0010 Part Numbers: HX-USCCPSS-BK HX-HSCC-2-BK Description: This firmware update improves compatibility for the Cloud Virtual 7.1 Surround Sound USB audio adapter on console systems. This update can also be used on the USB audio a

USB-C port: Connect to any supported system for use in adapter mode eg. PC, PlayStation 5. 3.5mm line out: Output playback audio through line out to a supported device eg. powered speakers, when the base station is set to line out mode. 3.5mm line in: Mix in audio from a supported device eg. Switch

Cloud Alpha 2 Wireless - Firmware v124 Change log Resolved an issue where devices failed to communicate properly with NGENUITY after resuming from sleep mode. Fixed a bug where lighting settings were not being saved on DAC keys. Addressed issue where Bluetooth functionality could fail when charging

1. While the headset is powered off, hold down the power button for about 10 seconds until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. 2. While the base station is plugged in and the base station output mode switch is set to headset, hold the top 3 butto

Cloud Stinger Core 7.1 Overview ​ A. Swivel to mute microphone B. Volume Wheel C. 3.5mm (4-pole) plug D. USB Adapter