Ratón

Warning: Improper or forced battery installation may cause permanent damage and is not covered under warranty. ​ Switch power mode to "OFF". Remove the mouse skates with a flat plastic tool to reveal and unscrew the 4x Torx 2 Security screws below. Gently separate and lift the top shell from the bot

Press and hold the DPI and Mouse Scroll wheen buttons for 5 seconds until the LED flashes. *All onboard settings will be erased!

Pulsefire Surge Firmware Update 1127 Download Firmware

It is recommended to fully charge your mouse before first use. Battery percentage can be found within NGENUITY. The mouse is charged via USB-C, located at the top part of the mouse. While the cable is attached, the mouse will operate in wired mode.

Pulsefire Haste Naruto Edition Specifications Specifications Shape: Symmetrical Sensor: Pixart PAW3335 Resolution: Up to 16000 DPI DPI Presets: 400 / 800 / 1600 / 3200 DPI Speed: 450 IPS Acceleration: 40G Buttons: 6 Left / Right buttons switches: TTC Golden Micro Dustproof Switch Left / Right button

Installation Connect the USB connector to the computer. Using with Console Connect the USB connector to PS4 or Xbox One to use with console.

HyperX Pulsefire Haste 2 S Quick Start Guide

How long does it take the mouse to charge from an empty to fully charged battery? It takes roughly about 2-3 hours to fully charge your mice. Just a tip, there is no fast-charging support for this product.

Pulsefire Haste 2 Overview A. Left Click B. Right Click C. Mouse Wheel D. DPI Button E. Forward button F. Back button G. HyperX 26K Sensor H. Grip Tape I. Mouse skates

Using our Ngenuity software, you can rebind all the mouse buttons except for mouse 1 and 2 (Left and right click). Those two can only be swapped.