Micrófono

The HyperX FlipCast features a cardiod pickup pattern with the front being the most sensitive to sound. This is useful for reducing the pickup of background or other unwanted sounds. FlipCast is an end-address dynamic microhpone. For optimal vocal performance, speak directly into the front of the mi

Guía de inicio rápido de DuoCast

A. Toque para silenciar el sensor B. LED de estado del micrófono C. Base del micrófono D. Ajuste de inclinación E. Puerto USB-C F. Montaje en soporte G. Cable USB-C

Microphone Power consumption: 5V 220mA (white light) Sample/bit rate: 48kHz/16-bit Element: Electret condenser microphone Condenser type: Three 14mm condensers Polar patterns: Stereo, Omnidirectional, Cardioid, Bidirectional Frequency response: 20Hz - 20kHz Sensitivity: -36dB (1V/Pa at 1kHz) Cable l

Note: The LED ring will present the polar pattern status 3 seconds when switching the polar pattern then shows the current light effect, but the LED will be turned off when muting the microphone.

Use an XLR cable to connect the microphone's output to a balanced XLR omicrophone input. Phantom power is not required and should be switched off.

QuadCast 2 S Quick Start Guide

Selecting a Polar Pattern ​ Rotate the polar pattern knob to select one of the four polar patterns. ​ Adjusting Gain Control ​ Rotate the gain control knob to adjust the gain of the microphone. Muting the Microphone ​ Tap the top of the microphone to mute/unmute the microphone. The microphone LED wi

Press the multifunction button to cycle through the adjustment modes. Turn the knob to the desired level. ​​ *3.5mm Connection Required ​ LED Microphone On - Headset Off = Adjust Microphpone Gain Microphone Off - Headset On = Adjust Playback Volume Microphone On - Hedaset On = Adjust Microphone Moni

Guía de inicio rápido de Solocast