Auriculares

CHARGE STATUS LED Fully Charged: Solid Green 15%-99%: Breathing Green

Headset Charging When the headset is connected to a charger with the USB charge cable, the ear cup LEDs will indicate the charge status.

In-line audio control operation The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone. To increase the headset volume rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume

Technical Specifications Headset Transducer type: Dynamic 53mm Operating principle: Closed Frequency response: 15Hz-25KHz Nominal impedance: 60 ohm per system Nominal SPL: 98+/-3dB THD: < 2% • Power handling capacity: 150mW Sound coupling to the ear: Circumaural Ambient noise attenuation: Approx. 20

Manual de usuario de Cloud Mix

Charging It is recommended to fully charge your headset before first use.

1. Set Input Device to USB Headset (HyperX Cloud Core Wireless) 2. Set Output Device to USB Headset (HyperX Cloud Core Wireless) 3. Set Output to Headphones to All Audio 4. Set Volume Control (Headphones) to maximum level.

Using the Headset Swivel to Mute Microphone Power Button Power on/off – Hold the power button for 3 seconds. Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time

Go to hyperx.com/ngenuity to download the NGENUITY software. NGENUITY software features include: DTS Headphone:X Adjustable EQ settings Adjustable auto shut-off behavior Battery level indicator

Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 20Hz–20,000Hz Impedance: 32 Ω Sound pressure level: 113dBSPL/mW at 1kHz T.H.D.: < 2% Weight: 288g Weight with mic: 298g Cable length and type: USB charge cable (1m) Microphone Ele