Auriculares

Cloud Mini Wireless Using with Mobile Devices *Requires 3.5mm headset jack with standard CTIA connection or compatible 3.5mm adapter. ​

1. Connect the wireless adapter to the PlayStation 5 console. 2. Go to the home page and select Settings > Sound 3. Under Microphone, set the following: Input Device: USB Headset (HyperX Cloud Stinger 2 Wireless) 4. Under Audio Output, set the following: Output Device: USB Headset (HyperX Cloud Stin

Cloud Stinger Wireless PS4™ Setup 1. Connect the wireless adapter to a front USB port on the PS4™ system. 2. Power on the headset. When the wireless adapter status light is solid, the headset is now connected to the adapter. To ensure the headset is configured with the most optimal settings on the P

Headset status Tone Notification Power On - 1 tone (mid) Power Off - 2 tones (high, low) Maximum volume reached - 3 tones (high) Minimum volume reached - 3 tones (low) Low battery (10%) - 4 tones (mid, low, mid, low) Microphone muted - 2 tones (high, high) Microphone active - 1 tone (high) Mic monit

Usage (PlayStation® 4) For optimal use with PlayStation® 4 (PS4®), unplug the headset jack from the USB control box and connect audio jack on the headset directly to the PS4 game controller and follow these steps: 1. Turn on your PS4® game console. 2. Navigate to the Settings Menu and select it. 3.

Setup The headset features a detachable cable and detachable microphone. To connect the detachable headset cable, locate the end with the headphone icon label and plug the cable into the female jack on the left headset ear cup. The plug and ear cup female jack both have a grey color for easy identif

Cloud Stinger 2 Xbox or PlayStation 5 Setup ​

*Supported only on compatible HP OMEN systems and a compatible Cloud II Core Wireless version. Pairing to HP OMEN System 1. In Ngenuity Software, navigate to the "Settings" page 2. Under "HyperX Internal Wireless Audio Adapter" device, click on "Initiate Pairing Mode" 3. Follow the On-Screen Instruc

Headphone Driver: Dynamic, 53mm with neodymium magnets Form factor: Over-ear, circumaural, closed-back Frequency response: 10 Hz – 21 kHz Impedance: 60 Ω Sensitivity: 99 dB SPL/mW at 1 kHz T.H.D.: ≤ 1% Frame type: Aluminum Ear cushions: Memory foam Microphone Element: Electret condenser microphone P

Volume Wheel - Scroll up or down to adjust volume level