Cloud III Wireless

Status LED ​

Usage ​ Please note, all Cloud III Wireless settings configured within NGENUITY on PC (other than the auto-power-off setting) are saved software-side. They will not carry over when using the headset on another platform eg. console.

Mic mute / Mic monitoring button Mic mute toggle - Press the button to turn the mic mute on/off Mic monitoring toggle – Hold the button for 3 seconds to toggle mic monitoring on/off

Cloud III Wireless Quick Start Guide

While the headset is powered off, hold down the power button until the headset status LED starts blinking red / green rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (eg. paper clip, SIM tray ejector, etc.) to hold down the button inside the

Setting up with PlayStation 5 Go to the home page and select Settings > Sound Microphone Input Device: USB Headset “HyperX Cloud III Wireless” Audio Output Output Device: USB Headset “HyperX Cloud III Wireless” Output to Headphones: All Audio Under volume, set headphones slider to maximum level

Volume Wheel Scroll up and down to adjust the volume level.

Charging It is recommended to fully charge your headset before first use.

A. Mic mute/mic monitoring button B. Status LED C. Power button D. USB-C charge port E. Microphone port F. Volume wheel G. Detachable microphone H. Microphone mute LED I. USB wireless dongle J. Dongle status LED K. Pairing pin hole L. USB-C to USB-A adapter M. USB charge cable

En resumen: si tu adaptador inalámbrico no funciona en tu PS5 u otro sistema, pero funciona correctamente en otro dispositivo, utiliza un concentrador USB con alimentación externa. Debe ser un concentrador con alimentación externa. Si sigues teniendo problemas, ponte en contacto con nuestro servicio