Quadcast Series

Quadcast Quick Start Guide

QuadCast S Connecting Headphones Connect headphones to the headphone jack on the microphone for microphone monitoring and playback audio.

Please see this article if you encounter issues updating your QuadCast S firmware. HyperX QuadCast S - Kingston/KTC QuadCast S Firmware Update 4101 Part Numbers: HMIQ1S-XX-RG/G Description: Fixed an issue that caused unexpected changes in the headphone volume. This is only for the Kingston variation

The microphone mount adapter is included with the packaging of our Quadcast/Quadcast S microphones. It does not come attached to the unit, please check the box and all packing materials for the adapter piece.

​ ​ A. Tap-to-Mute Sensor B. Gain Control Knob C. Polar Pattern Knob D. Headphone Jack E. USB Cable Port F. USB Cable G. Mount Adapter* *Supports both 3/8” and 5/8” thread sizes

PC - The Quadcast's mic monitoring can be disabled by going to Control Panel>Sound>Recording. Select the HyperX microphone and click Properties. Select the Listen tab and then disable "Listen to this device." The Quadcast S can be adjusted through Ngenuity under the Mic monitoring feature MAC - Open

​ Connect headphones to the headphone jack on the microphone for microphone monitoring and playback audio.

Selecting a Polar Pattern ​ Rotate the polar pattern knob to select one of the four polar patterns. ​ Adjusting Gain Control ​ Rotate the gain control knob to adjust the gain of the microphone. Muting the Microphone ​ Tap the top of the microphone to mute/unmute the microphone. The microphone LED wi

Quadcast Microphone Specifications Microphone Power consumption: 5V 125mA ample/bit rate: 48kHz/16-bit Element: Electret condenser microphone Condenser type: Three 14mm condensers Polar patterns: Stereo, Omnidirectional, Cardioid, Bidirectional Frequency response: 20Hz - 20kHz Sensitivity: -36dB (1V

PC From the Sound control panel, on the Playback tab, right-click on Speakers HyperX QuadCast and select Properties. On the Levels tab, adjust the Microphone volume slider to adjust the level of microphone monitoring. macOS Open the Finder app and go to Applications > Utilities > Audio MIDI Setup Cl