Cloud Stinger 2 Series

Microphone Down Position - Microphone Mute Off Microphone Up Position - Microphone Mute On

1. Connect the wireless adapter to the PlayStation 4 console. 2. Set Input Device to USB Headset (HyperX Cloud Stinger 2 Wireless). 3. Set Output Device to USB Headset (HyperX Cloud Stinger 2 Wireless). 4. Set Output to Headphones to All Audio. 5. Set Volume Control (Headphones) to maximum.

Cloud Stinger 2 Core Specifications Headphone Driver: Dynamic, 40mm with neodymium magnets Form factor: Over ear, circumaural, closed back Frequency response: 10 Hz – 25 kHz Impedance: 32.5 Ω Sensitivity: 95 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Plastic Ear cushions: Soft foam & fabric Micropho

Microphone Down Position - Microphone Mute Off Microphone Up Position - Microphone Mute On

Operation ​ Cloud Stinger 2 Wireless microphone positions

Microphone Down Position - Microphone Mute Off Microphone Up Position - Microphone Mute On

CloudX Stinger 2 Core for Xbox Quick Start Guide

1. Plug in the wireless dongle and launch NGENUITY 2. Click on the Headset tab 3. Click “Install” on the “Audio Drivers Required” prompt 4. Wait until the drivers are finished installing 5. Click “OK, Will Do” on the “Drivers Installed” prompt 6. Restart your PC

A. Swivel to mute microphone B. Status LED C. Power button D. USB-C charge port E. Volume wheel F. USB wireless adapter G. Wireless pairing pin hole H. Wireless status LED I. USB-C charge cable

The headset and wireless adapter are automatically paired together out of the box. But if manual pairing is needed, follow the steps below to pair the headset and wireless adapter. 1. While the headset is off, hold the power button until the headset status LED starts blinking red/green rapidly. 2. W