Cloud Family

Tuck-Away Boom Microphone ​

Cloud Mini Wireless Bluetooth Setup and Usage Bluetooth Pairing With the headset turned ON, press and hold the Bluetooth multifunction button for 2 seconds. The LED indicator will flash blue. On your Bluetooth-enabled device, search and connect to HyperX Cloud Mini. Once connected, the indicator LED

Cloud II Overview ​ A. Leatherette Headband w/ HyperX Logo B. Aluminuk Arm to Adjust Headband C. Attached Cable w/3.5mm input jack D. Detachable Microphone with Adjustable Arm and Condenser E. 3.5mm Audio Input Jack F. Extra Set of Ear Cushions G. Control Box Cable w/ USB Connector and Control Box H

Slide the mode switch to the Bluetooth icon. The headset will enter Bluetooth pairing on the first setup. Power on the headset. Go to your device Bluetooth settings, search, and connect to “HyperX Cloud III S Wireless”. ​

In-line audio control operation The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone. To increase the headset volume rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume

Using with PC, Chromebook, or Notebook ​

While the headset is powered off and in adapter mode, hold down the power button until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (e.g. paper clip, SIM tray ejector, etc.) to hold down the bu

1. Set Input Device to USB Headset (HyperX Cloud Core Wireless) 2. Set Output Device to USB Headset (HyperX Cloud Core Wireless) 3. Set Output to Headphones to All Audio 4. Set Volume Control (Headphones) to maximum level.

Cloud II Wireless Firmware-Update 4100 Firmware herunterladen Falls Ihr Headset nach dem Update nicht mehr zu funktionieren scheint, müssen Sie es möglicherweise erneut mit dem USB-Dongle koppeln.

Cloud II Wireless LED-Anzeige ​