Cloud Alpha Family

Using with console & mobile Connect the headset to the device’s 3.5mm port with the 3.5mm (4-pole) cable.

Performing a hardware reset on the headset will do a soft reset on all the internal hardware. This may be useful if the headset has unusual behavior, such as unresponsive controls. To perform a hardware reset, press and hold the mic mute button and the multifunction button for 5 seconds. The headset

It is recommended to fully charge your headset before first use. Charge Status Status LED Fully Charged Solid Green 61% - 99% Breathing Green 21% - 60% Breathing Yellow < 20% Breathing Red

Discord Setup 1.Under Discord settings, select Voice & Video. 2. Under Voice Settings, select Input Device to Microphone (HyperX Cloud Alpha S Chat). 3. Select Output Device to Headset Earphone (HyperX Cloud Alpha S Chat).

Cloud Alpha S Bass Adjustment Move the bass adjustment sliders up or down to change the amount of bass in the headset. Move the sliders up for more bass. Move the sliders down for less bass.

Headphone Driver: Custom dynamic, 50mm with neodymium magnets Type: Circumaural, closed back Frequency response: 13Hz–27,000 Hz Impedance: 65 Ω Sound pressure level: 98dBSPL/mW at 1kHz THD: < 1% Weight: 298g Weight w/ mic: 336g Cable length and type: Detachable headset (1.3m) + PC extension cable (2

Controls Status LED *Battery level indication *The status LED will automatically turn off to conserve battery life Power Button Hold for 3 seconds to power headset on/off Press to hear battery level voice prompt Mic mute / mic monitoring button Press to toggle mic mute on/off LED On – Mic muted LED

A. Status LED B. Power button C. Mic mute / monitoring button D. 3.5mm headset jack E. USB-C charge port F. Microphone poort G. Wireless mode switch H. Multifunction button I. Volume wheel J. Base station K. Base station USB-C port L. 3.5mm line out port M. 3.5mm line in port N. Detachable microphon

Drehen Sie das Lautstärkerad, um die Lautstärke zu erhöhen oder zu verringern. WARNUNG: Bei längerer Nutzung eines Headsets mit hoher Lautstärke kann es zu dauerhaften Hörschäden kommen.

1. Slide the headset wireless mode switch to the WiFi symbol and the base station mode switch to "HEADSET". 2. Power ON the headset.