Cloud Alpha 2 Wireless

NGENUITY requires administrative permission to install the drivers. With default User Accoount Control settings, you should receive a pop-up for "DriverInstaller". You will need to click "Yes" for the drivers to install. You may also need to adjust User Account Control settings.

Cloud Alpha 2 Wireless User Manual

1. Slide the headset wireless mode switch to the WiFi symbol and the base station mode switch to "HEADSET". 2. Power ON the headset.

A. Status LED B. Power button C. Mic mute / monitoring button D. 3.5mm headset jack E. USB-C charge port F. Microphone poort G. Wireless mode switch H. Multifunction button I. Volume wheel J. Base station K. Base station USB-C port L. 3.5mm line out port M. 3.5mm line in port N. Detachable microphon

Go to the home page and select Settings > Sound. For Microphone, set the Input Device to USB Headset "HyperX Cloud Alpha 2 Wireless Chat". For Audio Output, set the Output Device to USB Headset "HyperX Cloud Alpha 2 Wireless Game". For Output to Headphones, set to All Audio.

Cloud Alpha 2 Wireless Quick Start Guide

1. While the headset is powered off, hold down the power button for about 10 seconds until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. 2. While the base station is plugged in and the base station output mode switch is set to headset, hold the top 3 butto

Single Press: Play / Pause, Answer Call Double Press: Skip Track, End Call, Reject Call Triple Press: Previous Track Long Press (2 seconds): Activate Voice Assistant Note: Button functionality can vary between devices and apps.

Slide the wireless mode switch to Dual mode. Press and hold both the power button and the multifunction button for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says "Bluetooth pairing". Go to your device's Bluetooth settings and connect to "HyperX Cloud Alpha 2 Wir

Scroll up and down to adjust volume level.