Headset

Leider lässt sich das HyperX Cloud Chat nach der Montage nicht mehr auseinandernehmen. Der Versuch, den Kopfbügel nach der Befestigung zu entfernen, kann das Headset dauerhaft beschädigen.

Headphone Driver: Dynamic, 50mm with Neodymium magnets Form factor: Closed Back Frequency response: 10 Hz - 20.2 kHz Impedance: 32 Ω Sensitivity: 104.5 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Plastic Ear cushions: Memory foam and premium leatherette Microphone Element: Electret condenser micropho

​ Power Status Beep Tone Indicator Power on One tone (high) Power off Two tones (high, low) Volume Status Beep Tone Indicator Setting to 100% maximum volume Three tones (high) Setting to 0% minimum volume Three tones (low) Microphone Mute Status Beep Tone Indicator Microphone muted Two tones (high)

Die Verwendung eines Verstärkers mit dem Orbit S Headset wird nicht empfohlen, da die Standard-Line-Pegelspannung nicht überschritten werden darf. Bei einer höheren Ausgangsspannung als dem Line-Pegel kann es zu Verzerrungen oder Beschädigungen des Headsets kommen.

Usage (PlayStation™ 4) To use the headset with a PlayStation™ 4 (PS4™), connect the 3.5mm plug on the headset directly to the PS4™ game controller and follow these steps: Turn on your PS4™ game console. Navigate to the ‘Settings’ Menu and select it. Highlight the ‘Devices’ menu option and select it.

Setting up with PC 1. Connect the wireless USB adapter to the PC. 2. Power on the headset. 3. Right-click Speaker icon > Select Sounds 4. Under the Playback tab, click on “HyperX Cloud Core Wireless” and click on the Set Default button. 5. Under the Recording tab, click on “HyperX Cloud Core Wireles

Nutzung (Mobilgerät) Um das Headset mit einem Mobilgerät (oder einem anderen Gerät) mit einer Headset-Buchse (4-poliger CTIA-Stecker) zu verwenden, stecken Sie den 3,5-mm-Stecker direkt in die Headset-Buchse Ihres Geräts.

Cloud Mini Wireless Charging ​ It is recommended to fully charge the Headset before the first use. The headset will take approximately 2.5 hours to fully charge from low battery.

Cloud Usage (PC) To connect the headset to your computer (or other devices) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm jacks. The audio plug, which has green stripes, plugs

Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud headset with a mobile device, simply plug the “Y” cable into the 3.5mm audio jack as seen below. (NOTE: Location of the audio jack may vary based on the model and/or brand of mobile device you are using.) The volume of the conversati