Cloud Family

Bluetooth Multifunction Button Power Button ​

*This method is only possible if the OMEN laptop has already previously paired with a compatible Instant Pair headset. Open the NGENUITY software. Go to the Settings tab. Under “Connected Hardware,” select HyperX Wireless Embedded Receiver. Click Pair new headset to set the OMEN system in pairing mo

*Supported only on compatible HP OMEN systems and a compatible Cloud II Core Wireless version. Pairing to HP OMEN System 1. In Ngenuity Software, navigate to the "Settings" page 2. Under "HyperX Internal Wireless Audio Adapter" device, click on "Initiate Pairing Mode" 3. Follow the On-Screen Instruc

Power button Hold button for 3 seconds to power headset on/off Press button once to see the battery level status on the status LED The status LED will automatically turn off after 5 seconds to conserve battery life ​ Charging the Headset It is recommended to fully charge your headset before first us

(HP OMEN) Cloud II Core Wireless User Manual

Cloud Silver Specification Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, closed back Frequency response: 15Hz–25,000 Hz Impedance: 60 Ω Sound pressure level: 98dBSPL/mW at 1kHz THD: < 2% Input power: Rated 150mW, maximum 300mW Weight: 309g Weight w/ mic: 322g Cable length

Usage (Direct Connect) Connect your headset directly to your computer (or other devices) that have both a headset jack and a microphone jack. The headset jack, which has green stripes, plugs into the port signified by a green input or earphones symbol, and the microphone jack, which has pink stripes

Mic Mute Button Press the button to turn the mic mute on/off • LED On: Mic muted • LED Off: Mic active Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods.

Mobile ​ Connecting the Cloud Core 7.1 to mobile

Usage (Xbox One™) To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller. If your Xbox One™ controller does not have a 3.5mm jack you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox One