Pulsefire Haste 2 Pro

How long does it take the mouse to charge from an empty to fully charged battery? It takes roughly about 2-3 hours to fully charge your mice. Just a tip, there is no fast-charging support for this product.

The Pulsefire Haste 2 Pro is supported with Windows Dynamic Lighting (WDL). Windows Dynamic Lighting (WDL) in Windows 11 allows lighting control outside of NGENUITY. Please refer to WDL documentation for supported effects.

The mouse can’t operate on Bluetooth and 2.4G simultaneously, as the power switch allows only one connection mode at a time. However, you can use both Bluetooth and 2.4G on different computers. Pairing information for Bluetooth is saved and will auto-connect once in BT power mode. When switching bet

Does the Haste 2 Pro support NVIDIA Reflex? Currently, NVIDIA Reflex supports only the 1000Hz polling rate in 2.4G mode.

1. Switch the power mode to "OFF". 2. Remove the PTFE Skates with a flat, plastic tool (e.g. spudger, fingernails) to reveal the 4x Torx 6 Security Screws below the feet. 3. Gently separate and lift the top shell from the bottom shell in an upward motion. 4. Locate and remove the battery secured wit

There are 4 default DPI presets. 400 DPI (red) 800 DPI (blue) 1600 DPI (yellow) 3200 DPI (green) Max DPI Supported: Up to 26000 DPI.

You can customize the following features for the Pulsefire Haste 2 Pro through Ngenuity: Lift Off Distance RGB lighting DPI Macros Polling Rate (2.4G/Wired Only) Button re-assignment

If you are using the Pulsefire Haste 2 Pro on a Windows 11 system, and your lighting controls are not responding, Windows Dynamic Lighting (WDL) may be enabled. This will override any NGENUITY lighting controls and behavior, as long as the mouse is connected to the PC. Please check if WDL is enabled

2.4G Wireless Mode 1. Switch the mouse to 2.4G power mode. 2. Connect the USB wireless dongle to the extension adapter. 3. Connect the extension adapter to a PC or game console using the included USB cable. Keep the USB wireless dongle within 20cm of the mouse for optimal placement Bluetooth Mode 1.

The Pulsefire Haste 2 Pro has one onboard memory profile for storing a configuration from NGENUITY. Saved settings will remain in memory until either: Being overwritten within NGENUITY -> [Save to Mouse]. A factory reset is performed. On-board mouse settings will carry over onto any system the mouse