Cloud Stinger Family

Plug the headset into the controller using the 3.5mm jack

Cloud Stinger Usage (PS4) To use the headset with PlayStation™ 4 (PS4™), connect the 3.5mm plug on the headset directly to the PS4™ game controller and follow these steps: 1. Turn on your PS4™ game console. 2. Navigate to the Settings menu and select it. 3. Highlight the ‘Devices’ menu option and se

Cloud Stinger 2 PC or Laptop Setup ​

Headphone Driver: Dynamic, 40mm with neodymium magnets Form factor: Over ear, circumaural, closed back Frequency response: 10 Hz – 25 kHz Impedance: 32.5 Ω Sensitivity: 95 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Plastic Ear cushions: Soft foam & fabric Microphone Element: Electret condenser micro

A. Swivel to Mute Microphone B. Status LED C. Power Button D. Volume Wheel E. USB-C Charge Port F. USB Wireless Adapter G. USB Wireless Adapter Pairing Pin Hole H. USB Wireless Adapter Status LED I. USB-C to USB-A Charge Cable J. DTS Instructions

Cloud Stinger 2 Overview ​ A. Gaming Headset B. PC Splitter Cable C. DTS Headphone: X Instruction Card

1. Connect the wireless USB adapter to your device. 2. Power on the headset. 3. Follow the instructions on the DTS instructions card to enabled DTS® Headphone:X®. Please note there is no code to enter for this product; the USB will authenticate the app.

Slide the Wireless mode switch to the Bluetooth symbol Press and hold both the power button and the multifunction buttons for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says "Bluetooth pairing". Go to your device's Bluetooth settings and connect to "HyperX Cloud

Cloud Stinger Core 7.1 Connecting with USB Adapter ​

1. Connect the wireless adapter to the PC. 2. Power on the headset. 3. Right click speaker icon > Select Open Sound settings > Select Sound Control Panel 4. Under the Playback tab, click on “HyperX Cloud Stinger 2 Wireless” and click on the Set Default button. 5. Under the Recording tab, click on “H