Cloud Stinger 3 Wireless

Slide the headset wireless mode switch to the adapter symbol Connect the USB Wireless dongle to your device Power ON the headset

Microphone down position - Microphone On Microphone up position - Microphone Off

Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

Slide the wireless mode switch to the Bluetooth symbol. The headset will enter Bluetooth pairing on the first setup. Go to your device Bluetooth settings, search and connect to "HyperX Cloud Stinger 3 Wireless".

A. Swivel-To-Mute Microphone B. Status LED C. Power Button D. USB-C Charge Port E. Multifunction Button F. Volume Wheel G. Wireless Mode Switch H. USB Wireless Dongle I. Dongle Status LED J. Pairing Pin Hole K. USB-C to USB-A Adapter L. USB-C Charge Cable

Scroll wheel up or down to adjust volume level

Connect the headset using the USB cable. It is recommended to fully charge the headset before first use* Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

Battery Level Status - Press Power Button to check the battery level The Status LED will automatically turn off to conserve battery life. 61%-100% - Solid-fade Green 21%-60% - Solid-fade Yellow 10%-20% - Solid-fade Red

Single Press - Play / Pause / Answer Call Double Press - Skip Track / End Call / Reject Call Triple Press - Previous Track Long Press (2S) - Activate Voice Assistant *Button functionality can vary between devices and apps.

Slide the Wireless mode switch to the Bluetooth symbol Press and hold both the power button and the multifunction buttons for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says "Bluetooth pairing". Go to your device's Bluetooth settings and connect to "HyperX Cloud