Cloud Series

The Cloud Core Wireless DTS is not compatible with NGENUITY. Any software interaction with the headset will be done through DTS® Sound Unbound®. Please follow the instructions on the included DTS instruction card to enable DTS Headphone:X ®. Please note there is no code to enter for this product; th

Cloud Silver Specification Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, closed back Frequency response: 15Hz–25,000 Hz Impedance: 60 Ω Sound pressure level: 98dBSPL/mW at 1kHz THD: < 2% Input power: Rated 150mW, maximum 300mW Weight: 309g Weight w/ mic: 322g Cable length

Cloud Usage (Correct vs Incorrect) When connecting your HyperX Cloud headset to a device that has a single 3.5mm audio jack, you MUST use the splitter cable (or “Y” cable) to ensure that each jack is connected properly and securely plugged in. Do NOT ignore or leave any audio jacks unplugged as depi

Cloud Core Quick Start Guide

Cloud Core Overview A. Leatherette headband w/ HyperX logo B. Aluminium arm to adjust the headband C. Attached cable w/ 3.5mm input jack D. Detachable microphone with adjustable arm and condenser E. Mini 3.5mm jack plug (4 pole) F. PC extension cable

1. Set Input Device to USB Headset (HyperX Cloud Core Wireless) 2. Set Output Device to USB Headset (HyperX Cloud Core Wireless) 3. Set Output to Headphones to All Audio 4. Set Volume Control (Headphones) to maximum level.

PC or Mac PC: Control Panel › Sound › Set Default Playback and Recording to “HyperX Virtual Surround Sound” Mac: Apple® Menu › System Preferences › Sound › Set default output and input to “HyperX Virtual Surround Sound” * Virtual 7.1 surround sound effect output as a 2 channel stereo signal to be us

Cloud Usage (PC) To connect the headset to your computer (or other devices) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm jacks. The audio plug, which has green stripes, plugs

The headset and USB adapter are automatically paired together out of the box. But if the manual pairing is needed, follow the steps below to pair the headset and USB adapter. 1. While the headset is powered off, hold down the power button until the headset status LED starts blinking red/green rapidl

Usage (Xbox One™) To use the headset with Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox One™ controller* If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox On