Cloud Flight 2

Slide the mode switch to Bluetooth. The headset will enter Bluetooth pairing on the first setup. Go to your device Bluetooth settings, search, and connect to "HyperX Cloud Flight 2 Wireless".

Press both the power and multifunction buttons to toggle RGB LEDs on / off.* *Software required to customize RGB colors and lighting effects.

Power on / off: Hold button for 2 seconds to power headset on / off. Battery level status: Press button to check the battery level. The status LED will automatically turn off to conserve battery life. Battery Level Headset Status LED 61% to 100% Solid-fade Green 21% to 60% Solid-fade Yellow 10% to 2

Single press: Play / Pause, Answer Call Double press: Skip Track, End Call, Reject Call Triple Press: Previous Track Long Press (2 seconds): Activate Voice Assistant Note: Button functionality can vary between devices and apps.

Status Adapter Mode Bluetooth Mode Pairing Fast blinking white Fast blinking blue Searching Blinking white Blinking blue Connected Solid-fade white for 5 seconds Solid-fade blue for 5 seconds

Power on the gaming laptop. Locate the Wireless Module. Open the OMEN laptop screen. Identify the wireless receiver module located on the top right corner of the screen bezel. ​ Set the Headset to Adapter Mode. Slide the connection mode switch on the headset to WiFi symbol. With the headset in adapt

Slide the mode switch to Bluetooth. Press and hold both the power button and the multifunction button for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says, "Bluetooth pairing". Go to your device's Bluetooth settings and connect to "HyperX Cloud Flight 2 Wireless".

Read all instructions below, before attempting to replace the battery. Power OFF the headset. Carefully pull the right ear cushion from the headset. Note how it's slotted into the earcup. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover fro

Cloud Flight 2 User Manual

Slide the headset wireless mode switch to the WiFi symbol. Connect the USB wireless dongle to your device. Power ON the headset.