Cloud Flight Family

It is recommended to fully charge your headset before first use. ​ Charge Status Status LED Fully Charged Solid Green 61% - 99% Breathing Green 21% - 60% Breathing Yellow < 20% Breathing Red

Go to the home page and select Settings > Sound. For the microphone, set the Input Device to USB Headset "HyperX Cloud Flight 2 Wireless". For audio output, set the Output Device to USB Headset "HyperX Cloud Flight 2 Wireless". Additionally, set Output to Headphones to "All Audio".

Connecting the CloudX Flight 2 via Bluetooth Slide the wireless mode switch to Bluetooth mode. The headset will enter Bluetooth pairing on the first setup. Go to your device Bluetooth settings, search, and connect to “HyperX CloudX Flight 2 Wireless”.

Cloud Flight Overview ​ A. Volume Wheel B. Microphone Port C. USB Charge Port D. Analog Headphone Port E. Power Button F. Mic Mute Button G. Detachable Microphone H. Wireless Adapter I. Wireless Status LED J. USB Charge Cable

Press the power button to display the battery level Power on/off - Hold the button for 2 seconds to power headset on/off. Battery level status – Press button to see the battery level status on the status LED* and to hear the battery level via voice prompt. *The status LED will automatically turn off

HYPERX CLOUD FLIGHT HEADSET – HSCFFirmware Update Rev. 3116/4103 Part Numbers: HX-HSCF-BK Description: This firmware update contains two different sets of firmware: Rev. 3116 for build AxxLF/BxxLF and Rev. 4103 for CxxLF. The updater will automatically flash the correct firmware based on the build o

To enable/disable mic monitoring on Cloud Flight S, press the mic monitoring toggle pictured below.

Cloud Flight 2 User Manual

Power on / off: Hold button for 2 seconds to power headset on / off. Battery level status: Press button to check the battery level. The status LED will automatically turn off to conserve battery life. Battery Level Headset Status LED 61% to 100% Solid-fade Green 21% to 60% Solid-fade Yellow 10% to 2

Setting up with PC 1. Connect the wireless USB adapter to the PC. 2. Power on the headset. 3. Right-click speaker icon > Select Open Sound settings > Select Sound Control Panel 4. Under the Playback tab, click on “HyperX Cloud Flight S Chat”. Then click on the down arrow next to Set Default and sele