Cloud Alpha Family

Usage (PlayStation™ 4) To use the headset with a PlayStation™ 4 (PS4™), connect the 3.5mm plug on the headset directly to the PS4™ game controller and follow these steps: Turn on your PS4™ game console. Navigate to the ‘Settings’ Menu and select it. Highlight the ‘Devices’ menu option and select it.

Cloud Alpha Overview A. Headband adjustment slider B. Detachable noise cancellation mic C. Detachable headset cable D. In-line audio control E. PC Extension cable with 3.5mm stereo and mic plugs

USB-C port: Connect to any supported system for use in adapter mode eg. PC, PlayStation 5. 3.5mm line out: Output playback audio through line out to a supported device eg. powered speakers, when the base station is set to line out mode. 3.5mm line in: Mix in audio from a supported device eg. Switch

Scroll up and down to adjust volume level.

1. While the headset is powered off, hold down the power button for about 10 seconds until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. 2. While the base station is plugged in and the base station output mode switch is set to headset, hold the top 3 butto

1. Connect the wireless USB adapter to the PlayStation 5 console. 2. Go to the home page and select Settings > Sound 3. Under Microphone set the following: Input Device to USB Headset (HyperX Cloud Alpha Wireless) 4. Under Audio Output set the following: Output Device: USB Headset (HyperX Cloud Alph

The Cloud Alpha Wireless range is up to 20 meters *Wireless range may vary due to environmental conditions.

*Advanced Troubleshooting. Do not attempt if you are unsure. We highly recommend reaching out to the HyperX support team for assistance. - Verify that the DTS APO service "DtsHpXV2Apo4Service" is running. Can be checked in Windows "Services" App. If DTS APO service is not running, try installing Vis

Mic mute / mic monitoring button Press the mic mute/mic monitoring button to toggle mic mute on or off. LED On – Mic muted LED Off – Mic active Hold the button for 3 seconds to toggle mic monitoring on or off. Headset volume buttons Press the volume +/- buttons to adjust headset master volume up or

Slide the wireless mode switch to Dual mode. Press and hold both the power button and the multifunction button for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says "Bluetooth pairing". Go to your device's Bluetooth settings and connect to "HyperX Cloud Alpha 2 Wir