Clutch Gladiate

Controller Specifications Connection Type: Wired Compatibility: Xbox Series X|S, Xbox One, PC Inputs: USB-C, Mic (3.5mm stereo headset jack) Outputs: Headphones (3.5mm stereo headset jack) Physical Specifications (Metric/Imperial) Length: 155mm / 6.10in Width: 110.56mm / 4.35in Height: 64.68mm / 2.5

Ensure the Gladiate Xbox Controller is not connected to your device. Wipe gently with a slightly damp, soft cloth (e.g., Microfiber cloth).

Programmable ButtonsAssign/Re-Assign P2 & P3 Hold P1 and Release when LED is slowly flashing ​​ ​ When LED is flashing slowly, press one of the following buttons to assign. ​ ​​ ​ When LED is flashing rapidly, press either P2 or P3 to assign your selected button. ​ ​ Clear individually P2 or P3 When

​​ ​ A. Analog sticks (L3/R3) B. Xbox button C. Power LED D. ABXY buttons E. View button F. D-Pad G. Share button H. Menu button I. Trigger locks J. P1 button K. P2/P3 button L. 3.5mm headset jack M Bumpers (LB/RB) N. Triggers (LT/RT) O. USB-C port P. USB-C to USBA cable

HyperX Clutch Gladiate Setup (Xbox/PC) Connect the controller with the provided USB cable to your Xbox or PC. ​​ WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods.

HyperX Clutch Gladiate User Manual

If you are experiencing drifting or issues with the analog sticks or triggers, Calibration Mode will allow you to re-calibrate the analog sticks and triggers. Enter Calibration Mode 1. Press and hold View Button + Menu Button + Xbox Button ​ ​ 2. While holding the buttons above, plug in the USB cabl

HyperX Clutch Gladiate Quick Start Guide