Pulsefire Haste 2 Pro

How long does it take the mouse to charge from an empty to fully charged battery? It takes roughly about 2-3 hours to fully charge your mice. Just a tip, there is no fast-charging support for this product.

The Pulsefire Haste 2 Pro is supported with Windows Dynamic Lighting (WDL). Windows Dynamic Lighting (WDL) in Windows 11 allows lighting control outside of NGENUITY. Please refer to WDL documentation for supported effects.

To customize lighting, DPI, macro settings, and more, download HyperX NGENUITY software at: NGENUITY

If you happen to get a replacement USB dongle and don't know how to pair, follow the steps below! Select 2.4G for the connection type. Hold the Left Mouse Button & Right Mouse button + DPI Button at the same time until the mouse flashes Orange. Unplug/Plug in the USB dongle into your system. You wil

The mouse can’t operate on Bluetooth and 2.4G simultaneously, as the power switch allows only one connection mode at a time. However, you can use both Bluetooth and 2.4G on different computers. Pairing information for Bluetooth is saved and will auto-connect once in BT power mode. When switching bet

The HyperX 26K sensor is our custom variant to the PixArt PAW3395.

Does the Haste 2 Pro support NVIDIA Reflex? Currently, NVIDIA Reflex supports only the 1000Hz polling rate in 2.4G mode.

The default polling rate is 1k polling rate. Enable 4k Wireless Polling Rate 1. Power off the mouse completely. 2. Press and hold the DPI button. 3. While holding the DPI button, switch the mouse to 2.4G mode. The wheel LED will fast-blink green four times. To revert to the default 1k polling rate,

What is the mouse skate material? PTFE (Polytetrafluoroethylene).

To place Pulsefire Haste 2 Pro Wireless into Bluetoogh Pairing Mode. Move mouse power switch to bluetooth icon. Hold the left mouse button, right mouse button, and DPI button simutaneously until the mouse flashes blue. The scroll wheel will flash blue, indicating it is in Pairing Mode. ​ Pairing Mod