Quadcast Series

​ ​ A. Tap-to-Mute Sensor B. Gain Control Knob C. Polar Pattern Knob D. Headphone Jack E. USB Cable Port F. USB Cable G. Mount Adapter* *Supports both 3/8” and 5/8” thread sizes

​​ Connect the microphone to a USB port on the PS4 with the included USB cable. To ensure the microphone is configured with the most optimal settings on the PS4, follow the steps below: From the PS4 main menu, go to Settings > Devices > Audio Devices Set Input Device to USB Headset (HyperX QuadCast)

Installing Quadcast S Microphone the Mount Adapter Secure the included mount adapter onto a microphone boom arm. The mount adapter supports 3/8" and 5/8" thread sizes. Remove both the thumbscrew and nut from the microphone stand. Remove the microphone stand from the microphone. Align the mount adapt

PC - The Quadcast's mic monitoring can be disabled by going to Control Panel>Sound>Recording. Select the HyperX microphone and click Properties. Select the Listen tab and then disable "Listen to this device." The Quadcast S can be adjusted through Ngenuity under the Mic monitoring feature MAC - Open

A. Tap-to-mute sensor B. Gain control knob C. Polar pattern knob D. Headphone jack E. USB-C port F. USB cable G. Mount adapter* *Supports both 3/8” and 5/8” thread sizes

Microphone Power consumption: 5V 220mA (white light) Sample/bit rate: 48kHz/16-bit Element: Electret condenser microphone Condenser type: Three 14mm condensers Polar patterns: Stereo, Omnidirectional, Cardioid, Bidirectional Frequency response: 20Hz - 20kHz Sensitivity: -36dB (1V/Pa at 1kHz) Cable l

QuadCast S Connecting Headphones Connect headphones to the headphone jack on the microphone for microphone monitoring and playback audio.

Quadcast Microphone Specifications Microphone Power consumption: 5V 125mA ample/bit rate: 48kHz/16-bit Element: Electret condenser microphone Condenser type: Three 14mm condensers Polar patterns: Stereo, Omnidirectional, Cardioid, Bidirectional Frequency response: 20Hz - 20kHz Sensitivity: -36dB (1V

​ Connect headphones to the headphone jack on the microphone for microphone monitoring and playback audio.

Installing Quadcast Microphone the Mount Adapter Secure the included mount adapter onto a microphone boom arm. The mount adapter supports 3/8" and 5/8" thread sizes. Remove both the thumbscrew and nut from the microphone stand. Remove the microphone stand from the microphone. Align the mount adapter