Pulsefire Haste 3 Series

Plug the USB cable into the mouse and PC

Warning: Improper or forced battery installation may cause permanent damage and is not covered under warranty. ​ Switch power mode to "OFF". Remove the mouse skates with a flat plastic tool to reveal and unscrew the 4x Torx 2 Security screws below. Gently separate and lift the top shell from the bot

A. Left Click Button B. Right Click Button C. Mouse Wheel D. Forward Button E. Back Button F. USB-C Port G. PTFE Skates H. HyperX Performance Sensor I. Power Mode Switch J. DPI Button K. Extra Mouse Skates L. 8K Wireless Desktop Dongle M. USB Charge/Data Cable

Connect the mouse to a PC or game console using the included USB cable. When the battery level drops below 10%, the mouse wheel blinks red. When it's less than 5%, the LED turns off. *USB connectivity will override the selected power mode.

Connect the mouse to a PC or game console using the included USB cable. USB connectivity will override the selected power mode.

There are 4 default DPI presets: 400 DPI (Red) 800 DPI (Blue) 1600 DPI (Yellow) 3200 DPI (Green) *Max DPI up to 42000 DPI

Hold the left click button, right click button, and DPI buttons simultaneously until the mouse LED flashed blue.

*Warning: Improper or forced battery installation may cause permanent damage and is not covered under warranty. ​ Switch power mode to "OFF". Remove the mouse skates with a flat plastic tool to reveal and unscrew the 4x Torx 2 security screws below. Gently separate and lift the top shell from bottom

Switch the mouse to 2.4G power mode Connect the wireless desktop dongle to a PC or game console using the included USB cable. For optimal placement, keep the wireless desktop dongle within 20cm of the mouse.

There are 4 default DPI presets: 400 DPI (Red) 800 DPI (Blue) 1600 DPI (Yellow) 3200 DPI (Green) *Max DPI up to 42000 DPI